Jaz has grown quite a bit! Then: August 16, 2011, only a few minutes old. Now: August 16, 2012, one year old.
It’s hard to believe, but a whole year has passed for our little pup. In fact, a little over a year ago, we weren’t even planning on getting a dog! But we happened to vacation close to the British Lake District that year, where one thing lead to another and before we knew it, the puppy count-down had started. 365 Days ago, Jaz was born, ready to get herself into all sorts of trouble we had no clue about!
As somewhat of a graduation ceremony after taking the handling classes, and also to put our newfound skills to the test in the real world, I decided to enter Jaz in a local dog show. So I went ahead and signed us up for the Pacific Kennel Club dog show in Surrey. This event was the perfect opportunity to put our hard work into practice!
Entering the show ring… “Let’s go, Jaz!”
The PKC dog show is a four-day-long outdoor all-breed show. I entered Jaz for two out of the four days. This turned out to be the perfect amount – enough to get the full experience, but not so much that it’ll drive you crazy. Because it definitely can drive you crazy, as there is a lot of work involved! Not just the grooming leading up to the shows, but the prepping at the show as well. Driving to the location, setting up all your stuff, washing, drying, brushing and fine-tuning the dog… and once you’re done showing you have to pack everything up, wash your dog up and do it all over again the next day! Luckily, Jaz’s breeder is very hands-on, and she helped me with most of it!
In a conformation dog show, the dogs are divided into seven groups: group 1: sporting, group 2: hound, group 3: working, group 4: terrier, group 5: toy, group 6: non-sporting, and group 7: herding. The dogs in each group are first judged in comparison to dogs of their own breed. This happens in alphabetical order; Airedale Terrier, Border Terrier, Cairn Terrier… Lakeland Terrier… etc. Puppies and adults are judged separately and then go up against each other for “best of breed.”
Placing Jaz on the table for breed-judging… Day 1
Since Jaz was the only Lakeland Terrier entered in this show, we knew we would take home all the ribbons for breed (“winners,” “first,” “best puppy,” as well as “best of breed”). However, this did not mean that I could be lax about it! Most of the time, the judge’s only time of going over your dog (i.e. examining it hands-on) is during breed-judging, which impression will be crucial later on.
Jaz being examined by the judge, day 2
It is crucial to do well on the table, because after all the breeds of your specific group have gone through breed-judging, the “best of breed” winners will go up agains each other for group placements. More often than not, during group-judging, the judge will just look at the dog and no longer examine it up close, relying on his/her memory from breed-judging to recall which dogs are great/good/not so good representations of their breed.
Group-judging, day 1
Group-judging, day 2
The results of the group-judging will determine which dogs will go up against each other for the big title of the day: “best in show.” Unfortunately, Jaz didn’t place in group. This is not a big surprise, though, as she is still a puppy and a little juvenile looking. But this didn’t mean that the day was over for us! If none of the puppies place in group, there will be a separate group-judging of puppies only. On the first day, one of the puppies placed in group, but on the second day none did and Jaz had to go in the ring for a third time.
Highly concentrated! Puppy-group, day 2
We ended up losing to an American Staffordshire Terrier, but it seemed like a close-call since the judged looked back-and-forth between the Staffordshire and Jaz a couple of times!!! I was so proud of Jaz for doing such a wonderful job! We might not have won anything, but we definitely put our best foot (paw?) forward and showed everyone what a beautiful Lakeland Jaz is!
This is the second installment in my five-part series on grooming. Because we are showing Jaz, I’ve been very interested in the what, why, and how behind the grooming of wire-coated terriers. Jaz received her first “haircut” from her breeder (Judy Gruzelier) at the age of 8 weeks, right before we took her home. When she turned 12 weeks, the breeder gave me my first grooming lesson, and ever since I have been slowly but steadily acquiring the eye and skill required to hand-strip a Lakie from her. In a way, grooming is an art. A groomer can be seen as a sculptor, and the well-groomed dogs she produces as living sculptures. I am no professional, and still learning the tricks of the trade myself, but in this series of posts on grooming, I will try to communicate what I have learned so far…
Grooming sections. The sections labelled “A” are what is called “flats.” (source)
Flats are the first areas I learned how to strip. These areas are the ears and head (minus fall and beard), the front of the neck and chest as well as the bum and the tail. As I have said before (in my general introduction to grooming), in these areas the hair is the shortest and is supposed to lay flat. Due to the fact that the hair is shortest here, it needs weekly stripping if you want to keep it at an acceptable length.
On the table, ready for some flat-work!
Every Monday, like clockwork, I put Jaz on the table to do her flats. First I give her a thorough brush-through, and then I reach for the following tools (in the order pictured below):
– Clippers: Wahl arco 6170
– Rake: Greyhound 20
– Stripping stone: Greyhound transition 8mm
– Stripping knives: Pearson products detail stripper extra fine, Hauptner Heberholz “Real” stripping knife 68510, Pearson products finishing stripper medium.
In this post, I will try to describe what to do and how to do it, clarified by before/after pictures and two videos showing how I use the tools.
Tools: clippers, rake, stripping stone and three different stripping knives.
The idea is to start stripping the longest hairs and to keep going until all the hair is only a couple of millimeters long. When you first try this on your Lakie, he/she will have a lot of bald spots, as no layers have been built up. Not to worry. Just keep going week after week, and you’ll notice that, eventually, enough hair will be left after stripping. The continuous stripping of the coat will result in a “rolling” coat; a coat consisting of many layers of hair of different lengths. The hair you pull out week1 will be one week long by week2, two weeks long by week3 and so on until it is time to strip it out again (which, when dealing with flats, is sooner rather than later). Notice that by week4, you’ll have three layers built up (the hair you pulled week1 that is three weeks long, the hair you pulled week2 that is two weeks long and the hair you pulled week3 that is one week long). If you keep at it consistently, there will be plenty of layers, and these layers will grow denser, allowing your Lakie to look better and better.
Now I hear you thinking “That’s great, but HOW do I use these tools? Do I just start pulling hairs out?” No. You need to know the basic rules and techniques to do a good job.
First of all, you need to make sure to pull your dog’s skin taut (just like aestheticians do when tweezing or waxing people). This not only makes the stripping easier, but also prevents the stripping from causing your dog any pain.
The goal is to pull the hairs out entirely; roots attached. This is why it is crucial that you make sure all your stripping knives are nice and dull. The Pearson knives come pre-dulled, but tools like the Greyhound rake and the Hauptner-Heberholz stripping knives are sharp when you purchase them. You don’t want to risk these tools cutting the coat, so before you use them, get a bucket of sand and run the rake or knife through it. I did this for about two weeks whenever we were watching tv in the evenings. You can see whether the tool is blunt enough by trying it on your dog and closely examining the hairs you’ve taken out. If the hairs have roots and are of different lengths, your tool is dull enough. If the hairs are all the same length and have no roots, you need to keep you bucket with sand beside the couch a little longer.
But beware, for even with a dull knife you can cut your dog’s coat! You need to make sure that you pull the hairs straight out in the direction they are growing. Do not flick your wrist when you pull the hairs out, but make sure to pull them out straight, along an imaginary line the hair would have if it were longer than it is. Flicking your wrist will not only make it harder to pull the hairs out, but it may also cause the hairs to break.
I usually start with the face and ears, as these areas are less sensitive than the bum. For most of the face, I use the greyhound stripping stone and the Hauptner-Heberholz, and I love using the Pearson detail stripper for the ears, especially the edges.
If you have a hard time seeing which hairs are longest, brush the hairs up with your finger to make them stand up. Whatever sticks out needs to go!
BEFORE – front flats
When stripping front flats, draw and imaginary line above the eyes and from the corners of the mouth to the corners of the eyes. Anything that is behind the line is part of flats. Flats stop behind the ears, where they make a smooth transition into the back of the neck. Flats continue under the chin, along the front of the neck and chest, smoothly bending into the longer hair on the legs. For this blending work, I like using the Pearson finishing stripper in medium. Blending will be explained in the grooming posts about jacket and furnishings.
Halfway done. (This is the length you would keep your flats if you are not showing and want your dog looking perfect, bald-spot free at all times. Because we are showing, I strip them a bit shorter, allowing the hair to grow to the perfect length in +/- 5 days; I strip on Mondays and shows usually start on Fridays.)
AFTER – front flats (Notice the bald spots? Not to worry! This hair will grow back in in a few days. The hair on the cheeks is especially short to obtain the brick-shaped head the breed standard calls for. Note that you may have to do more/less of this, because these small details differ per dog; some have bigger cheeks than others!)
After I’ve finished stripping the face, I grab my clippers and clipper the inside of the ears, after which I move to the back to clipper around the private parts. (Note that the inside of the ears, around the private parts, between the footpads and the lower belly are the only parts you are allowed to cut/clipper on a Lakeland that is being shown.) [Note to black Lakeland owners: I was recently informed by Drs. M.A.M. Dekker (Lakeland breeder and fanatic) that, on black Lakies that are shown, the privates and lower belly are to be stripped and not clippered. This is because the difference between stripped and clippered parts of the coat are significantly more noticeable in black Lakelands. Many thanks to Drs. Dekker from The Sounding Burrows Kennel for this sidenote. Please visit The Sounding Burrows (in English or in Dutch) for a wealth of Lakie information!]
BEFORE – rear flats
Once you’re done with the clippers and the longer hairs around the privates have been removed, it’s time to strip the bum. You need to be extra careful when stripping this area. Not only is the area far more sensitive, but the hairs also grow in many different directions. In the beginning you will have to keep reminding yourself to pull the hair out in the direction it grows only.
The rear flats run from the top of the tail down to the privates in an oval shape (see diagram at the beginning of this post) and blend into the hips and legs. Note that the hair on the tail can be left a little longer, depending on the individual dog, because it needs to be in proportion!
Halfway done. (Again: this is the length you would keep your flats if you are not showing and want your dog looking perfect, bald-spot free at all times. Because we are showing, I strip them a bit shorter, allowing the hair to grow to the perfect length in +/- 5 days; I strip on Mondays and shows usually start on Fridays.)
AFTER – rear flats (Looking a little bare? Not to worry! The hair will grow back in in a few days.)
Here is step-by-step video, showing you how I use the tools:
Every week, along with flats, I remove the undercoat from Jaz’s jacket (or the section labelled “C” in the diagram). This removes the soft, fluffy, light-coloured undercoat and leaves only the wiry hairs behind. It is really easy. Just brush through the jacket with a rake, keeping the skin taut:
So. Now you know how to strip those flats! It’s a lot of work in the beginning, but things will get easier and faster every time. Consistency is key; really make an effort to strip on a regular basis. The most important thing to keep in mind is that it’s okay to pull a hole in the flats here and there. Because these areas are kept so short, the hair will grow back in no-time. And remember: it all needs to come out at some point!
Summer is here, and puppy training season is in full swing. If you want to hang out with Jaz, you better call ahead and make a reservation, because this little pup has one full agenda! Last week, we had recall training on Monday and Thursday, handling training on Tuesday, and a rally obedience match on Sunday… with a play-date thrown in here and there plus ongoing bi-weekly grooming, Jaz is keeping us on our toes.
Look at this perfect free-stack! You can tell that we’re preparing Jaz’s coat for the show… it’s short and a little patchy-looking, but don’t worry… it’s all part of the process!
As you can tell, it is on! Since my schedule is pretty flexible during the summer, I am taking advantage of it by kicking this puppy’s butt into shape. Firstly, I’ve been grooming a lot due to our upcoming show at the end of the month (and possibly three more shows in August). Our breeder has been helping with the primping, and my skills are improving by leaps and bounds. I’m at the point where I’ve developed an eye for it and can now actually see what adjustments the breeder is making and why. I’m starting to feel more like the sculptor and less like the child whose arts and crafts project depicting a cat is mistaken for an elephant.
An imperfect “stand” in process… front legs need to run parallel, but at least she’s standing still and concentrating so I can look up and see what the judge is doing!
What ties in with the grooming are the handling classes I’ve been taking. For some reason I’ve made the decision to try showing Jaz myself (I know what you’re thinking… I must be delusional!). So every Tuesday, I’ve been walking circles, diagonals, triangles, and L-shapes, as well as lifting Jaz on and off a table and trying to get her to stand properly. Not and easy feat, I tell you! Not only do I have to keep Jaz’s attention, but I also have to make it fun without getting her overly excited, all the while getting her to walk, turn or stand a certain way. But besides paying attention to Jaz (which, trust me, is a full-time job in itself), I also have to pay attention to switching hands, breaking off pieces of bait, whipping out a squeaky toy at the right time, as well as watching the judge and the direction I’m going in (I’ve experienced a few close encounters and one near-collision!). Oh, and before the end of the month I have to know how to do all of the above while keeping a comb handy to keep Jaz’s wild facial hair in check. (Yup. Just another minor detail. Why on earth did I decide to do this again…?!?)
I cannot help but laugh when Jaz pulls another one of her tricks. Lakies are not the easiest to train, but you will definitely have lots of fun doing it!
Since we couldn’t stop just there, we also entered Jaz in a bi-weekly summer program that focusses on recall. After all, it would be nice if she actually came when called. Especially since she is a terrier of the naughtiest kind, we need all the help we can get. Every Monday and Thursday we take her to a class where she tries to chase all the other dogs, steals their toys (to no avail; they’re all on long leashes at a safe distance!) and sometimes (well, more than sometimes… Jaz managed to average 4 out of 5 last night!) comes when called…
Fully concentrated… “What’s next, mom?”
If you think that, after all the above, we’ll have had enough, think again! After the recall program wraps up and the shows are done, we are thinking of entering Jaz in rally obedience class. Rally obedience is competitive obedience where you’re asked to walk a certain course with the dog while completing small exercises such as “sit,” “down,” slalom, and 180 degree turns.
Jaz & Kornelis: ready for their first rally obedience fun match!
Jaz and her dad competed in their first rally obedience fun match last week. They were disqualified in the first run because, during the sit/down exercise (a “sit” followed by a “down”), instead of dropping from the “sit” position straight into the “down” position, Jaz took a few steps in between (it wasn’t her fault; daddy didn’t hold the treat close enough!). Luckily, the second run went much better. It was a close call, but due to the fact that they were 5 seconds faster than the other dog and handler they tied scores with, Jaz and Kornelis ended up taking home “high in class” – the price for the highest score!
Jaz: “C’mon Carl, gimme that ball!” Carl: “I don’t think so, missy…”
A few months ago, Jaz met this Welsh terrier puppy named Carl. You may remember me briefly mentioning him here. Well, Carl and Jaz finally met up for some playtime last week. Carl is about a month younger than Jaz, and they make the most hilarious couple. We dropped both of them in the yard with some toys, and they roughed it up terrier-style! The victim of the day was a colourful catfish squeaky…
Jaz and her new buddy Carl, best friends forever! Look at those cute faces!
Together, they would go round and round:
Carl still manages to find time to look at the camera. Nice multitasking, buddy!
Jaz takes the lead…
…but Carl is a little stronger when it comes to tug-of-war, Jaz’ favourite game!